Cassette 2
ASTEROIDS IN SPACE (c) Neil Streeter
You are travelling through space in your spaceship, when suddenly you encounter a space
storm. You can steer your ship past the debris only by using your rudder controls (key '5' to
go left, and key '8' to go right).
SPECTRUM CLOCK (c) Beam Software
This program is a simulation of a REAL-TIME CLOCK, both normal and digital are
implemented. Type RUN followed by (ENTER) to start the program. Time is entered on a 24
hour basis, it means that you have to type in 13th hour instead of 1p.m. You can also set the
ALARM and the SPECTRUM CLOCK will remind you by generating alarm tone.
HIGH RESOLUTION GRAPHICS (c) Beam Software
Ths program enables you to change the 21 USER DEFINED GRAPHIC CHARACTERS of
the Spectrum. You can change either 1 or 2 or 4 consecutive characters at one time. Type
RUN (ENTER) to start the program. Cursor control - '5' left, '6' down, '7' up, '8' right, '1' turn
pixel on, '0' turn pixel off. Operation control: 'b' blank all, 'f' fill all, 'm' mirror image, 's' save
changes in memory, 'e' exit with no changes.
LINE RENUMBERING (c) Beam Software
This program enables you to renumber your whole BASIC program or part of it. The program
is from 9900 to 9999 so you need to MERGE it into your own program - watch for
overwriting! To delete the renumbering program itself - type GOTO 9945 (ENTER).
BLOCK LINE DELETE (c) Beam Software
This program enables you to delete a block of program lines from your BASIC program. To
use the program, you must enter the starting and ending line number of the block you want to
delete. Deletion is inclusive. You have the option to delete this program itself as you run it.
Use 'MERGE' not 'LOAD'. Watch for overwriting.
THE MACHINE CODE MONITOR (c) Beam Software
This program enables you to examine the contents of any memory location in the Spectrum,
whether in the ROM or in the RAM. You can use the arrow keys (shift 5 to 8) to move the
cursor around. Pressing any key other than the arrow keys will allow you to change the
contents of that memory location. The value you enter must be in Hex format.
ELIMINATOR (c) Beam Software
Your task is to ELIMINATE the invaders. You must prevent their attempts to kidnap the
humanoids under your care. Your only controls are up and down, using the 'W' and 'X' keys.
You have at your disposal a laser blaster, controlled by pressing the 'P' key. After three hits,
your craft is no longer operative.
User Defined Graphics for Freeway Frog & Freeway Frog (c) Beam software
You are a frog desperately trying to get home across the highway. To control your frog use
the following keys: 'Q' to move up, 'A' to move down, 'P' to move right, 'O' to move left. You
only get points for moving up and down. LOAD the Graphics program, RUN the Graphics
program, LOAD the main program, RUN the main program. 
ADVENTURE (c) Beam Software
This program allows you to have an adventure on your SPECTRUM. The computer will
display a description of the location that you are in and it will describe any objects that you
can see. It will then ask you what you want to do. The commands you may use consist of one
or two words usually a verb followed by a noun. Some of the commands are north, south,
east, west, up and down, these allow you to move around. Inventory - lists everything you are
carrying, take - picks up objects, drop - drops objects. You will find it helpful to draw a map
of the world you are exploring.